<\/span><\/h2>\nCentral hot water system, also known as hot water system using heat pump technology, is a system consisting of a set of water heating devices controlled by sensor relays. Operating based on a system of equipment such as heat pump, circulation pump, temperature sensor, electric valve to control water flow, safety valve…<\/p>\n
The central hot water system has a distinct heating technology that is superior to conventional hot water supply methods. Water is heated quickly in just a few minutes, with large capacity to meet abundant hot water use without the need for a water tank.<\/p>\n
Central hot water system is a system of exchanging environmental air through heat exchanger, cooling the wind through the compressor, bringing the incoming refrigerant to be heated to the heat exchanger to heat the water and vice versa, thermal sensor relay degree. Operated by safety control valve and circuit breaker.<\/p>\nCentral hot water system, also known as hot water system using heat pump technology, is a system consisting of a set of water heating devices controlled by sensor relays.<\/em><\/figcaption><\/figure>\n<\/span>Installation application of central hot water pump cluster<\/span><\/h2>\nToday’s central hot water system, widely used in life, can be divided into 3 areas of use as follows:<\/p>\n
\nCentral hot water system for households<\/li>\n Central hot water system for industrial use<\/li>\n Central hot water system for swimming pools, spas, resorts.<\/li>\n<\/ul>\n<\/span>Benefits of installing a central hot water pump cluster<\/span><\/h2>\nThe central hot water pump cluster system is a modern water heater system, bringing many benefits to users, so it is chosen by many people:<\/p>\n
\nThe durability of the system is high, without worrying about burning the tank like a traditional water heater.<\/li>\n Low system operating costs, helping to save costs<\/li>\n For high efficiency to save electricity 70% – 80%<\/li>\n Free heat source, environmentally friendly<\/li>\n High efficiency and energy saving: using this type of water heater also reduces energy waste. To heat the steam, you can use equipment such as heaters, air conditioners, heaters, fan heaters, etc. In the summer, the system will create cool air to replace the air conditioner and can customize the temperature to suit the family. family, convenient for winter.<\/li>\n Easy to install as well as disassemble the simple systems, so when the house design changes, there is no fear of buying a new or damaged system.<\/li>\n<\/ul>\nBenefits of installing a central hot water pump cluster<\/em><\/figcaption><\/figure>\n<\/span>Detailed installation instructions for central hot water pump assembly<\/span><\/h2>\nStep 1:<\/strong> Survey the needs of use and field materials<\/p>\nStep 2:<\/strong> Estimate materials on the basis of optimization<\/p>\nStep 3:<\/strong> Transport equipment for installation and test run<\/p>\nStep 4:<\/strong> Acceptance – maintenance – warranty<\/p>\n<\/span>Notes when installing Central hot water pump cluster<\/span><\/h2>\n4 important notes when installing the central hot water pump assembly include the following steps:<\/p>\nNotes when installing Central hot water pump cluster<\/em><\/figcaption><\/figure>\n<\/span>1. Choose a suitable installation location<\/span><\/h3>\nThe installation location of the central hot water system must be suitable, such as cool, fresh, good ventilation, making use of waste heat as possible.<\/p>\n
The location should also be close to the water source to shorten the pipe length. Besides, it is advisable to avoid using alum, saline water when producing hot water, if there is a customer, a water treatment tank can be installed.<\/p>\n
<\/span>2. Design insulation layer for central water heater system<\/span><\/h3>\nHot water when transported on pipes will have heat loss to the outside, especially in winter because the temperature difference is larger, so the possibility of heat loss in the pipeline is greater. Central hot water system heat pump will have to work more to meet the demand, so it will consume more electricity. Therefore, it is necessary to install an additional layer of insulation for the pipes, this layer not only protects the pipeline but also limits heat loss to the outside environment, saving energy for the whole system. system<\/p>\n
<\/span>3. Arrangement of circulation pump and return water line<\/span><\/h3>\nThe water after heating is not always used immediately, but instead there will be periods of time when the water is not used. Thus, the hot water on the pipe will cool down due to heat loss, which will cause waste of energy and time.<\/p>\n
Installing a circulation pump, return water line and a temperature sensor arrangement will make it easier for the hot water system to recover the cooled water on the pipe and reheat it. This will help maintain the water temperature in the line. pipe is always maintained stable.<\/p>\n